Fencecoat Black
Black Acrylic Lacquer Fence & Barn Paint
Available At:
Recommended Uses
- Plank fences
- Barn exteriors
- Metal buildings, roofs, and structures
- New and weathered wood
- Concrete
- Silos
- Sheds
- Not suitable for flooring, high traffic areas, interiors, or confined spaces
Features
- Product dries to an extremely tough and durable semi-gloss finish that will not chalk, peel, or rub off.
- Can be applied over virtually any type of marginally prepared surface with excellent results – including asphalt, creosote, and CCA salt treated lumber.
- Can be applied over previously painted or unpainted surfaces.
- Lead free and safe around valuable livestock.
- Not recommended for interior applications.
- Self-priming on all surfaces.
- Will not rub off on horses or humans.
- 4 to 6 years of durability on plank fence, depending on fence condition and surface preparation. Initial coat on new wood will age quicker than recoats.
Color:
Black
Finish/Sheen:
Semi-Gloss
Available Packaging:
Flash Point:
88°F (PMCC)
Viscosity:
72 KU
VOC:
Shelf Life:
2 years in unopened cans. To maximize shelf life, store out of direct sunlight. Product will not be affected if stored below 32°F. Settling can occur, product must be shaken vigorously before use. For best results, flip pails upside down while shaking.
Coverage
3 & 4 board fence: 16 ft. / gal., both sides
1 board fence: 26 ft. / gal., both sides
Barns: 250 sq. ft. / gal.
Coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Using less material than recommended will see a decrease in durability. May require two coats for best results.
Dry Time
Set to touch: 4 hours
Re-coat: 8 hours
Fully dry: 24 hours
Drying times are affected by rain, dew, and temperature. Do not paint if rain is expected within 8 hours.
Recommended Film Thickness
Wet film – per coat: 6.0 to 10.0 mils
Dry film – per coat: 2.0 to 4.0 mils
Application
Product should be thoroughly mixed before use. Thinning is not recommended.
Application temp.: Any
Method: Brush, roll, or spray
Allow new wood 1 to 3 months to weather to reduce moisture content. Do not paint the underside of fence planks.
Airless spray:
- Rating: 0.5 gallons / minute minimum
- Pressure: 1,800-2,500 psi
- Filter: 30 to 60 mesh
- Tip Size: 0.017″ to 0.021″
Roller application: use thick nap 7” roller.
Surface Preparation
For greatest durability make sure fence is scraped or pressure washed thoroughly by removing any peeling or flaking paint before applying.
